PTFE Lined Braided Hose

A: Yes. The standard model can withstand 1.6-4.0MPa pressure, and the high-pressure customized model can reach up to 10MPa, suitable for high-pressure gas transmission such as nitrogen and compressed air. The sealing scheme should be matched according to gas characteristics.

A: Smooth PTFE inner tube: low flow resistance, high cleanliness, suitable for clean fluids, food and pharmaceutical transportation
Corrugated PTFE inner tube: stronger flexibility, smaller bending radius, suitable for space-constrained or frequently dynamic connection scenarios

A: Yes. PTFE material is inherently resistant to steam sterilization (SIP) and in-line cleaning (CIP) processes, suitable for systems operating at temperatures up to 150–200°C. High-temperature-rated fittings and compatible clamps must be selected.

A: Avoid excessive bending (not less than 3 times the hose diameter of bending radius) or scratch by sharp objects; it is recommended to use special hose fittings for connection to ensure tightness; high-temperature working conditions need to reserve thermal expansion space to prevent joints from
loosening due to thermal expansion and contraction.

A: Regularly check for wear and bulges on the surface; avoid contact with open flames or sharp objects; when conveying strong oxidizing media, it is recommended to conduct a pressure test every year to ensure stable performance.

A: It is recommended to replace if the following situations occur: liner damage leading to medium leakage, large-area fracture of braided layer, failure to pass pressure test, failure of outer functional coating (such as decreased flame retardancy), so as to avoid potential safety hazards.