一,High viscosity of liquid or semi fluid materials
Food-grade silicone tubing is often used to move drinks and food, like milk, yoghurt, juice, honey, syrup, sauces, and more. These materials are very thick, and if the flow rate is too low or the pipeline is not used for a long period, it is simple for residue to build up on the pipe wall and block it. In a yoghurt processing factory, for instance
2. Improper selection of pipe diameter
Silicone tubing has an inner diameter that is too tiny, which might cause a "bottleneck" when moving high-viscosity materials and stop the fluid from flowing smoothly. This not only makes blockages more likely, but it could also cause pumps or other equipment to work too hard, which speeds up wear and tear.
3. Pipe bending or folding
Another big reason for blockages is bad installation. If the pipeline bends too much or folds, the fluid is likely to stop moving at the curve. This is especially true for semi-fluid or granular liquids like mud jam or granular yoghurt.
二,Ways to keep food-grade silicone tubing from getting blocked
1. Choosing the right size and length of pipe
Choose the right pipe diameter and length based on the material's viscosity, flow rate, conveying pressure, and temperature. Silicone tubes with bigger inner diameters are better for high-viscosity materials because they let fluids flow more smoothly. In honey processing or syrup filling, for instance, the pipe diameter should be at least 1–2 millimetres bigger than the normal conveying diameter of the material pipeline
2. Don't bend too much
When installing, try to avoid abrupt bends of 90° or more to make sure that pipes connect smoothly. This is especially important for equipment like juicers, coffee makers, and yoghurt makers, where bent pipes can quickly get stuck. You can utilise elbow fittings or keep a curvature radius that is 4–5 times the pipe diameter for necessary bending.
3. Cleaning and disinfecting on a regular basis
After using the pipeline, clean it right away and disinfect it with hot water or steam to make sure the inside is clean. It is best to rinse or wash perishable items like dairy products, juices, and syrups right after they are made or once a day.
4. Check and replace often
If you use silicone tubing for a long time, it may age, crack, or change shape slightly. Also, residues might build up and clog the tube. It is best to check the pipeline every three to six months, depending on how often it is used, and replace it if needed.
5. Keep an eye on the temperature and viscosity of the substance
To make sure that fluids flow smoothly when moving materials with a high viscosity, you can heat or dilute them. For instance, honey tends to settle out in cold places, but you can keep it liquid by boiling it with warm water. Syrup can be heated to 30–40 °C before being shipped to lower the chance of settling out.
三,How to clean food-grade silicone tubing that is blocked
1. Flushing with hot water
Flushing the pipeline with hot water will soften the residue inside the pipe, which can help clear obstructions. It works for most meal and drink leftovers. You can set the temperature of the hot water between 50 and 70 degrees Celsius for thick liquids like honey or syrup.
2. Cleaning using steam
Steam may eliminate bacteria and also make thick materials softer and get rid of obstructions. It can clean and disinfect at the same time, making it great for dairy goods and juice liquids. This makes things safer and cleaner.
3. Cleaning with an elastic brush
You may get rid of stuff stuck to the pipe wall and stop it from getting blocked again by using a soft food-grade brush to scrub along the interior of the pipe. To make sure the brush gets to every region of the pipe wall, the size of the brush should match the size of the pipe.
四,Examples of how the industry uses it
1. A plant that processes food
Food-grade silicone tubing is used to move liquids on lines that make dairy, juice, and syrup. Flushing with hot water and disinfecting with steam on a regular basis helps stop obstructions and make output more efficient. For instance, flushing the pipeline after each batch of juice production can stop fruit residue from building up at the bend.
2. Tools for making drinks
Household appliances including coffee makers, milk tea makers, and yoghurt makers employ silicone tubes to move hot water, milk, and juice. To easily see the flow and quickly find blockages, use clear silicone tubing. For seasonings with a lot of viscosity, they can be heated and moved to keep them from getting stuck.
3. Products for mothers and children
Food-grade silicone tubing should be kept clean in things like baby food dispensers, bottle connections, and water dispenser hoses. If it gets clogged, it could make food unsafe and harm babies' health. It is best to use silicone tubing that is very flexible and easy to take apart and clean.
