1. Clean with soapy water
1. Remove the silicone tube from the device and drain the remaining liquid.
2. Take a basin of soapy water and put the silicone tube in the water.
3. Rub gently with your hands to allow the soapy water to penetrate into the silicone tube.
4. After cleaning for about ten minutes, rinse with clean water and dry it.
2. Disinfect with vinegar water
1. Remove the silicone tube from the device and drain the remaining liquid.
2. Take a basin of vinegar water and soak the silicone tube. Be careful not to soak it for too long to prevent corrosion to the silicone tube.
3. After cleaning for about ten minutes, rinse with clean water and dry it.
3. Clean with oxalic acid
1. Remove the silicone tube from the device and drain the remaining liquid.
2. Take a basin of oxalic acid water and put the silicone tube in the water.
3. After cleaning for about ten minutes, rinse with clean water and dry it.
Note: Oxalic acid is good at removing precipitation, but users must pay close attention to safety.
IV. Cleaning with sodium chloride
1. Remove the silicone tube from the equipment and drain the remaining liquid.
2. Take a basin of sodium chloride water, soak the silicone tube, and put the silicone tube in the water.
3. After cleaning for about ten minutes, rinse with clean water and dry it.
Note: When using chlorine water or chlorine-containing disinfectant for cleaning, be careful not to use too high a concentration to avoid corrosion to the silicone tube.
